DD1100 RS Performce Specs

Power Train
Engine	Caterpillar® C-18 Tier III Diesel
Power Train Noise Rating	80 dB(A)
Rating	765 HP (570 kW)
Fuel Capacity	650 U.S. Gallons (2,460 L)
Hydraulic Capacity	220 U.S. Gallons (833 L)
Hydraulic Filter	High Pressure Filtration to 6 Micron ABS
Battery	(2) Deka 908DMF 12 V, 1450 CCA
Carriage System
Maximum Thrust/Pullback	1,100,000 lbs. (500 Tonnes)
Carriage System	Rack & Pinion, (6) Pinion and Gear with Adjustable Force Limiter
Maximum Carriage Speed	105 ft. (32 m)/minute
Carriage Motors	(6) Radial Piston, Dual Displacement
Carriage Brakes	(6) Spring Applied/Hydraulic Release
Carriage Gearbox	(6) Planetary Drives
Hydraulic Pump	(2) Closed Loop-Piston
Rotary Drive
Rotary System	(4) Pinion and Gear Drive with Infinitely Variable Torque
Maximum Rotary Torque	100,000 ft-lbs. (135,600 Nm) @ 0 – 31 RPM
Minimum Rotary Torque	40,000 ft-lbs. (54,230 Nm) @ 0 – 75 RPM
Maximum Rotary Speed	75 RPM
Rotary Motors	(4) 160cc, Axial Piston, Variable Displacement
Rotary Brakes	(4) Spring Applied, Hydraulic Release
Fluid Course	4 in. (102 mm)
Mud Flow Rate	1,000 U.S. Gallons (3,785 L)/per minute
Maximum Mud Pressure	1,500 psi (103 bar)
Mud Shutoff Cylinder	2 in. Bore x 12 in. Stroke (51 - 305 mm)
Mud Blow Down Cylinder	1 1/16 in. Bore x 4 in. Stroke (27 - 102 mm)
Hydraulic Pump	(2) Closed Loop-Piston
Auxiliary Pump	(1) 74cc Pressure Compensated-Piston
Slip Spindle	8 5/8 in. (219 mm)
Mud Swivel	Rear Mounted, 5.5 in. (140 mm) F.L.H. Down-Hole x 6
Other Features	Wiggle Steer®, Adjustable Torque Limiter, Digital Tachometer
Drill Rig
Drill Angle	10° - 18°
Drill Pipe	Range II – 34 ft. (10.4 m)
Pipe Support Cylinder	2.5 in. Bore x 4 in. Stroke (63.5 - 102 mm)
Guide Bushing Cylinder	4 in. Bore x 8 in. Stroke (102 - 203 mm)
Drill Rig Mounting	Tri-Axle Suspension Base
Axle Spacing	60 in. (1,524 mm)
Wrench
Wrench System	Triple Jaw with 12 in. (305 mm) Separation
Clamp/Grip Range	3.5 in. – 10.5 in.  (89 – 267 mm) OD
Maximum Breakout Torque	230,000 ft-lbs. (311,800 Nm)
Maximum Makeup Torque	100,183 ft-lbs. (135,800 Nm)
Top Clamp Cylinder	8 in. Bore x 3 in. Stoke (203 - 76.2 mm) for 226,000 lbs. (102,500 kg) of Clamping Force
Top Clamp Movement Cylinder	2.5 in. Bore x 12 in. Stroke (63.5 - 305 mm)
Wrench Travel	Wrench can Travel the Full Length of the Thrust Frame
Hydraulic Breakout/Makeup Cylinder	(9) 6 in. Bore x 16 in. Stroke (152.4 - 406.4 mm)
Wrench Separation Cylinder	4 in. Bore x 12 in. Stroke (102 - 305 mm)
Wrench Motor	(2) Hydraulic, LSHT, 12.5 CIR, 6B SPL
Wrench Brake	(1) Spring Applied, Hydraulic Release
Pivoting Hook Pads	Ability to Remove the Wrench w/o tools or bolts
Safety
Es!Lok – Exit Side Lockout System with 5,280 ft. (1,609 m) Range  Zap Alert – Electrical Detection Device Emergency Shutdown Switch at the Operators Console (8) Attachable  Handrails for Full Length Thrust Frame Walkway Work Lights - (4) 500 Watt
Drill Rig Dimensions
Length	64 ft. 10 in. (19.8 m)
Width	8 ft. 1 in. (2.5 m)
Height	11 ft. 10.25 in. (3.6 m)
Single Power Pack Dimensions
Length	19 ft. 8 in. (5.99 m)
Width	8 ft. (2.43 m)
Height	9 ft. 5 in. (2.88 m)
Drill Rig Weight
Total Weight	tbd
Total Weight w/o Wrench	103,000 lbs. (46,720 kg) – Wrench is Removable for Lighter Transport
Single Power Pack Weight
Total Weight	34,520 lbs. (15,691 kg)
Product Options
Dual Power Pack for Run-On-One-Technology-System (ROOTS)	Simultaneously run both power units Permits one power unit to run while powering through the unused power unit Allows one power unit to run, but keeps the unused power unit isolated Excercise the ability to have one power unit running, but have the unused power unit removed Unit maintains full power with single engine, but system runs with half rotational RPM and half carriage drive speed