84/96-1800 NG Performance Specifications
Exceptional Force * Reliable Results

Power Train
Engine	Caterpillar C-7 ACERT Tier III Diesel
Rating	300 HP (223 kW)
Maximum Engine Speed	2100 RPM
Maximum Forward Engine Torque	838 ft-lbs. (1,163 Nm)  2100 RPM
Maximum Reverse Engine Torque	773 ft-lbs. (1,048 Nm) 2100 RPM
Fuel Capacity	87  U.S. Gallons (329 L)
Hydraulic Capacity	90  U.S. Gallons (340 L)
Battery	(2) Deka 634MF 12 V,  690 CCA
Transmission
Type	Eaton FRO112106 – 10 Speed
Transmission Ratios	Gear Ratio 1St Gear 12.69:1 2ND Gear 9.29:1 3RD Gear 6.75:1 4th Gear 4.90:1 5TH Gear 3.62:1 6TH Gear 2.59:1 7TH Gear 1.90:1 8TH Gear 1.38:1 9th Gear 1.00:1 10th Gear 0.74:1  Reverse    13.75:1
Clutch	Dual Plate, Spring Applied with 14 in. (356 mm) Diameter Twin Disk/Hydraulically Assisted Clutch Actuator
Gearbox
Ratio	25.6:1
Torque & Speed
Torque Requirements	Gear Output Max. Speed 1st 272,236 ft-lbs. (369,103 Nm) 6 RPM 2nd 199,296 ft-lbs. (270,209 Nm) 9 RPM 3rd 144,806 ft-lbs. (196,330 Nm) 12 RPM 4th 105,118 ft-lbs. (142,521 Nm) 17 RPM 5th 77,659 ft-lbs. (105,291 Nm) 23 RPM 6TH 55,562 ft-lbs. (75,332 Nm) 32 RPM 7th 40,760 ft-lbs.  (55,263 Nm)    43 RPM 8th 29,604 ft-lbs. (40,137 Nm) 59 RPM 9th 21,452 ft-lbs. (29,085 Nm) 60 RPM 10th 15,420 ft-lbs. (20,910 Nm) 60 RPM Reverse 272,096 ft-lbs. (368,913 Nm) 6 RPM *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss
Hydraulic System
Maximum Thrust	1,800,000 lbs. (816 Tonnes)
Hydraulic Pump	Axial Piston Pump with Load Sensor
Gear Pump	40 CIR, LH, SAE
Operating Pump Pressure	4,000 psi (276 bar)
Maximum Pump Output	55  U.S. Gallons (209 L)/minute
Hydraulic Motors	(2) 60 CIR, LSHT
Hydraulic Push Bar Cylinder	(1) 2 in. Bore x 2 in. Stroke (51 mm x 51 mm)
Hydraulic Clutch Cylinder	(1) 1 3/4 in. Bore x 4 in. Stroke (45 mm x 102 mm)
Hydraulic Thrust Cylinder	(4) 12 in. Bore x 35 in. Stroke (305 mm x 889 mm)
Hydraulic Suction Strainer Filter	Suction Strainer with 149 Mesh Screen
Hydraulic Return Filter	High Pressure Return Filter to 6 Micron ABS with Replaceable Element
Master Pusher
Diameter	84 in. (2,134 mm)
Working  Range	24 in. - 84 in. (610 - 2,134 mm)
Hex Drive	6 in. (152 mm)
Quik Split™	Quik Tran™
The Quik Split™ frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning.	Quik Tran© is the fast return system, made available exclusively from American Augers, as it provides up to 20,000 lbs (9,072 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. The benefit of Quik Tran will be easier and faster machine operation in challenging work climates or conditions.
Spoil Door
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.
Dimensions
Length	17 ft. (4.87 m)
Width	8 ft. 8 in. (2.69 m)
Height	9 ft. 4 in. (2.84 m)
Master Track Length (Two Section Assembly)	Total Assembly: 16 ft. (7.31 m) (1) 8 ft. (2.43 m) section w/1 1/2 inch (38 mm) back plate (1) 8 ft. (2.43 m) section
Master Track Width	10 ft. (3 m)
Extension Track Length	(3) 8 ft. (2.43 m)
Extension Track Width	10 ft. (3 m)
Centerline	54.37 in. (1,381 mm)
Weight
Base Unit ( Split Weight)	13,800 lbs. (6,260 kg)
Power Pack ( Split Weight)	21,000 lbs. (9,525 kg)
Master Pusher	4,850 lbs. (2,200 kg)
Front Master Track	5,900 lbs. (2,676 kg)
Rear Master Track	7,500 lbs. (3,402 kg)
Lifting Sling	900 lbs. (408 kg)
Total Weight	53,950 lbs. (24,470 kg)
Extension Track	6,000 lbs. (2,722 kg) each
Master Saddle	600 lbs. (272 kg)
Misc.
Work Lights	(3) 24 Volt
Extension Track	(3)
Master Saddle	(1) 96 in. (2,438 mm) compatible
Master Pusher Product Option
Diameter	96 in. (2,438 mm)
Working Range	24 in. - 96 in. (610 - 2,438 mm)
Master Pusher Weight	5,550 lbs. (2,517 kg)                                     Note: All other split weights will remain the same
Total Weight	54,650 lbs. (24,790 kg)
Master Saddle Weight	800 lbs. (363 kg)
Master Saddle	(1) 96 in. (2,438 mm) compatible

(*Note All product performance specifications, components, weights, dimensions, and other related information is subject to change without notice from the manufacturer.)