|
Exceptional Force * Reliable Results
|
Power Train |
|
Engine |
Deutz F6L914 turbo-diesel |
|
Rating |
114 HP (85 kW) |
|
Maximum Engine Speed |
2500 RPM |
|
Engine Torque |
|
|
Fuel Capacity |
18.5 U.S. Gallon (70 L) |
|
Hydraulic Capacity |
22.6 U.S. Gallon (86 L) |
|
Battery |
One, Deka 634MF, 12 V, 690 CCA |
|
Transmission |
|
Type |
Spicer, 5 Speed, Constant Mesh |
|
Transmission Ratios |
|
Gear |
Ratio |
|
1St Gear |
7.17:1 |
|
2ND Gear |
4.21:1 |
|
3RD Gear |
2.54:1 |
|
4th Gear |
1.45:1 |
|
5TH Gear |
1.00:1 |
|
Reverse |
7.17:1 | |
|
Clutch |
Spring Applied w/ 13" (330 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator |
|
Gearbox |
|
Ratio |
54.2:1 |
|
Torque & Speed |
|
Torque Requirements |
|
Gear |
Ratio |
Max. Speed |
|
1st |
113,087 ft lbs (153,323 Nm) |
8 RPM |
|
2nd |
66,401 ft-lbs (90,026 Nm) |
14 RPM |
|
3rd |
40,061 ft-lbs (54,315 Nm) |
24 RPM |
|
4th |
22,870 ft-lbs (31,007 Nm) |
40 RPM |
|
5TH |
15,772 ft-lbs (21,384 Nm) |
61 RPM |
|
Reverse |
113,087 ft-lbs (153,323 Nm) |
9 RPM | *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss |
|
Hydraulic System |
|
Maximum Thrust |
600,000 lbs (2,669 Nm) |
|
Hydraulic Pump |
Axial Piston Pump w/Load Sensor |
|
Gear Pump |
100cc, Piston Pump |
|
Maximum Pump Pressure |
4,750psi (334 bar) |
|
Maximum Pump Output |
35 U.S. Gallons (132 L)/minute |
|
Hydraulic Motors |
Two, 60 CIR, LSHT, TPR |
|
Hydraulic Push Bar Cylinder |
One,2” Bore x 4” Stroke (8hc20020) |
|
Hydraulic Clutch Cylinder |
One, 1 ½” Bore x 4” Stroke 8HC10005) |
|
Hydraulic Thrust Cylinder |
Two, 9” Bore x 35” Stroke 8HC90035 |
|
Hydraulic Suction Strainer Filter |
Suction Strainer w/ 100 Mesh Screen |
|
Hydraulic Return Filter |
High Pressure Return Filter to 6 Micron ABS w/Replaceable Element |
|
Misc. Performance Data |
|
|
Working Range |
12 – 42 inch (305 – 1067 mm) Casing Diameter |
|
Hex Drive |
4 inch (125mm) Hex |
|
Quik Split™ |
Quik Tran™ |
|
The Quik Split™ frame design, allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning |
Quik Tran™ is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions. |
|
Spoil Door |
|
|
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. |
|
|
Dimensions |
|
|
Length |
13' (3.9 m) |
|
Width |
6' 4" (1.9 m) |
|
Height |
5' 6" (1.67 m) |
|
Master Track Length |
13’ (4 m) w/1” (25 mm) back plate |
|
Extension Track Length |
10’ (3 m) |
|
Weights |
|
|
Base Unit ( Split Weight) |
5,600 lbs (2,540 kg) |
|
Power Pack ( Split Weight) |
6,400 lbs (2,909 kg) |
|
Master Pusher |
1,300 lbs (591 kg) |
|
Master Track |
3,700 lbs (1,682 kg) |
|
Lifting Sling |
175 lbs (79 kg) |
|
Total Weight |
17,175 lbs (7,790 kg) |
|
Extension Track |
2,800 lbs (1,263 kg) each |
|
Master Saddle |
290 lbs (132 kg) |
|
This page was last updated on
Tue Aug 12, 2008.
|
