Power Train

Engine

Caterpillar® C-15 Tier III diesel

Battery

Rating

Generator Set

Caterpillar® D125-6 114 kW, prime rating 480 volt, 60Hz

Noise Rating

1 meter distance: 104 dB(A)
3 meter distance: 95 dB(A)

Generator Set Noise Rating

97 dB(A) without attenuation

Transmission

Eaton FRO-16210B 10 speed

Fuel Capacity

255 US gallons (965 L)

Clutch

clutch dual plate with air actuator

Operating Controls

Remote Controls

Mud pump throttle, mud pump start/stop, clutch actuator, horn

Remote Instruments

Digital mud flow meter, (gallons per minute/liters per minute)
Analog engine tachometer 

Mud Pumping System

Main Pump

Tri-Plex 600 GPM, bore stroke 6 in. x 6 in. (152.4 mm x 152.4 mm) 

Maximum Flow

600 US gallons (2,271 L)/minute

*Note:  Cleaning capacities will vary depending on the overall mud weight, drilling fluid mixture/content and working environment. 

Maximum Pressure

1,505 psi (104 bar) 

Pump Motors

(1) 3-phase electric, 30 HP (22kW)
480 V for mixing/agitation

• Inlet Size: 6 in. (152.4 mm)
• Outlet Size: 5 in. (127 mm)
• Impeller Size: 10 in. (254 mm)

(1) 3-phase electric, 30 HP (22kW)
480 V for charging hydro-cyclones

• Inlet Size: 6 in. (152.4 mm)
• Outlet Size: 5 in. (127 mm)
• Impeller Size: 10 in. (254 mm)

(1) 3-phase electric, 25 HP (18.6kW)
480 V for supercharging of Tri-plex pump

• Inlet Size: 6 in. (152.4 mm)
• Outlet Size: 5 in. (127 mm)
• Impeller Size: 9.5 in. (241.3 mm)

Bentonite Mixing System

Polyethylene constructed dry bentonite mix hopper

Other Features

Pulsation dampeners on inlet and discharge, liner wash system with supply tank

Cleaning System

Linear Motion Shakers

1st cut with 27 sq. ft. (2.51 m²) area with (3) 50 mesh screens

2nd cut with 18 sq. ft. (1.67m2) area with (2) 140 mesh screens

various additional mesh sizes available.

1st Cut Shaker Cleaning Capacity

Estimated 300 US gallons (1,135 L)/minute 

Desilting System

(9) 5 in. (127 mm) desilter
Hydr-cyclones manifold mounted

Desilting System Cleaning Capacity

Estimated 720 US gallons (2,725 L)/minute

*Note: Cleaning capacities will vary depending on the overall mud weight, drilling fluid mixture/content and working environment.

Supply Tanks

Screen Tank

2,000 US gallons (7,571 L) capacity 

Cleaning Fluid/Mixing Tank

4,000 US gallons (15,140 L) capacity 

Other Features

18 in. (457 mm) cleanout ports

Transport

Mounting

Rock-over design in tri-axle suspension

Axle Spacing

4 ft. 6 in. (1.22 m)

Kingpin Diameter

2 in. (51 mm)

Lift Jacks

(2) hydraulically operated lift jacks raise the front to 52 in. (1,321 mm)clearance at the kingpin

Lift Jack Cylinder

(2) 5 in. bore x 42 in. stroke (127 mm x 1,067 mm)

Lift Jack Motor

(1) 10 HP (7.5 kW)

Dimensions

Maximum Length

51 ft. 6 in. (15.7 m)

Maximum Height

13 ft. 1 in. (4 m)

Maximum Width

98.4 in. (2.5 m)

Weight

Total Weight

60,800 lbs. (27,580 kg)

Safety

•  Walkways with handrails
• Stairway and ladder with anti-slip treads
• Emergency shutdown switch on operator's controll panel
• Electrical grounding stake with cable
• (4) 500 watt quartz work lights