Power Train

Engine

Caterpillar® C-18, Tier III, Diesel

Rating

700 HP (500 kW)

Fuel Capacity

650 U.S. Gallons (2,460 L)

Hydraulic Capacity

220 U.S. Gallons (833 L)

Hydraulic Filter   

High Pressure Filtration to 6 Micron ABS

Battery

Two, Deka 908DMF, 12 V, 1450 CCA

Carriage System

Maximum Thrust/Pullback

1,100,000 lbs (500 Tonnes)

Carriage System

Rack & Pinion, (6) Pinion and Gear with Adjustable Force Limiter

Maximum Carriage Speed

105 feet (32 m)/minute

Carriage Motors

Six, Radial Piston, Dual Displacement

Carriage Brakes

Six

Carriage Gearbox

Six

Hydraulic Pump

Two, Piston Pump, Closed Loop             

Rotary Drive

Rotary System

(4) Pinion and Gear Drive with Infinitely Variable Torque

Maximum Rotary Torque

100,000 ft-lbs (136 Nm) @ 0 – 31 RPM

Minimum Rotary Torque

40,000 ft-lbs (54,000 Nm) @ 0 – 75 RPM

Maximum Rotary Speed

75 RPM

Rotary Motors

Four, 160cc, Axial Piston, Variable Displacement

Rotary Brakes

Four, Spring Applied, Hydraulic Release

Fluid Course

4” (102 mm) for increased down hole hydraulic power

Mud Flow Rate

Permits up to 1,000 U.S. Gallons (3,785 L)/min flow

Maximum Mud Pressure

1,500 PSI (103 bar)

Mud Shutoff Cylinder

2” Bore x 12” Stroke

Mud Blow Down Cylinder

1 1/16” Bore x 4” Stroke

Hydraulic Pump

Two, Piston Pump, Closed Loop           

Auxiliary Pump

One, Piston Pump, 74cc, Left Hand, Pressure Compensated 

Slip Spindle

8 5/8” PIN

Mud Swivel

Rear Mounted, 5 ½” F.L.H. Down hole x 6

Other Features

Wiggle Steer™, Adjustable Torque Limiter, Digital Tachometer

Drill Rig

Maximum Breakout Torque

230,000 ft-lbs (312,000 Nm)

Maximum Makeup Torque

100,183 ft-lbs (138,252 Nm)

Drill Angle

10° - 18°

Drill Pipe

Range II – 34 ft (10.4 m)

Pipe Support Cylinder

2 ½ Bore x 4” Stroke

Guide Bushing Cylinder

4” Bore x 8” Stroke

Mounting

Thrust Frame Mounted to Tri-Axle Suspension Base

Hold Down System

H-Beam Style w/Hold Down Stakes

Telescoping Drill Frame Lift Cylinder

6"/ 7"/8” Bore x 83” Stroke

Wrench

Wrench System

Triple Jaw Wrenches w/ 12” (305 mm) Separation

Clamp/Grip Range

3 ½” – 10 ½” (89 – 276 mm) OD

Top Clamp Cylinder

8” Bore x 3” Stoke for 226,000 lbs of Clamping Force

Top Clamp Movement Cylinder

2 ½” Bore x 12” Stroke

Wrench Travel

Wrench can Travel the Full Length of the Thrust Frame

Hydraulic Breakout/Makeup Cylinder

Nine, 6” Bore x 16” Stroke

Wrench Separation Cylinder

4” Bore x 12” Stroke

Wrench Motor

Two, Hydraulic, LSHT, 12.5 CIR, 6B SPL

Wrench Brake

One, Spring Applied, Hydraulic Release

Pivoting Hook Pads

Ability to Remove the Wrench w/o tools or bolts

Dimensions

Maximum Length

55 ft. (16.8 m)

Maximum Width

8 ½ ft (2.59 m)

Maximum Working Height

19 ft (5.79 m)

Maximum Transport Height

10 ft 6 inches (3.04 m)

Weights

Total Weight

110,800 lbs (50,258 kg)

Total Weight w/o Wrenches – Removable for Lighter Transport

103,000 lbs (46,720 kg)